How do I replace the baseboard on my EDGESTAR DWP62 series countertop dishwasher? – EdgeStar

The baseboard is a decorative cover plate located on the lower front of the unit, underneath the door. If damaged, the baseboard is easily replaceable.

NOTE: Empty contents of unit and disconnect from power source before attempting any repairs.

Tools Needed:

- Phillips Screwdriver - Flat Tip Screwdriver

Step 1: Remove the Baseboard

Turn the unit upside-down
Remove the two Phillips head screws that secure the baseboard to the bottom of the unit

Unlatch the two snap latches with a flat tip screwdriver

NOTE: After unlatching one side, lift up on the baseboard to keep it from falling back into the locked position

Lift the baseboard up towards you and pull away from the unit

Step 2: Install the new Baseboard

Line the 4 guides up into the slots making sure the wiring harness fits between the two guides in the center

Slide the baseboard into the slots and slide the baseboard down into the snap latches.
Install the two screws securing the baseboard to the bottom of the unit.

Return unit to an upright position.

For additional service procedures, please locate the DWP62 Series Service Manual located within the following article: EdgeStar Dishwasher Service Documents