How do I assemble and install the wall sleeve for my Koldfront built in air conditioner?

A window air conditioner listed as "built in" or "through the wall" is intended to be built into a wall as opposed to secured into a window opening.  In order to be properly installed, what is referred to as a "wall sleeve" must be utilized.  When properly installed, a wall sleeve creates the required housing for the air conditioning unit, holds the unit securely in place and creates a proper seal between the inside and outside of your home.

Koldfront Through the Wall Air Conditioner Sleeve: Model WTCSLV

Product Details: 

 

  • Fits Koldfront through the wall window air conditioners, including models WTC8001W and WTC12001W.
  • Can accommodate most other brands of through the wall ACs
  • Dimensions: 15 1/4" H x 25 1/2" W x 17 1/2" D

 

Detailed assembly and installation instructions can be found here:

Koldfront WTCSLV Through the Wall Sleeve

NOTE: Not intended for use with a standard window air conditioner unit.  Window mounted air conditioner units are vented thru the side of the unit, while a through the wall air conditioner is vented through the back of the unit.  Installing a window unit into a wall sleeve will inhibit the ability of the unit to properly vent.  

Stay up to date on this article:
Follow
Was this article helpful?
0 out of 0 found this helpful

Comments