How do I reset my EdgeStar IP210 portable ice maker?

If your EdgeStar IP210xx icemaker has stopped working, it may need to be reset.  To reset your portable ice maker, please follow the below instructions.  

PLEASE BE SURE THE UNIT HAS BEEN UNPLUGGED FROM ITS POWER SOURCE BEFORE PROCEEDING.

Step 1: Unplug power cord from wall outlet.  

This is both a safety precaution as well as a necessary step to be able to manually move the ice shovel in step 2.

Step 2: Manually adjust the ice shovel position through its cycles

While firmly pressing the middle of the ice shovel (see below image) push the ice shovel mechanism towards the back of the unit, then pull towards the front of the unit and finally push it all the way to the back of the unit again.  Please repeat this action 3 times.  NOTE: You will hear a 'zipping' sound as you move the motor manually.

Step 3:  Plug power cord back into wall outlet

Step 4: Power unit on 

Please review the following EdgeStar service video for additional instructions on this procedure.  

If problems persist, please consult with an authorized technician or contact EdgeStar service at 800-297-6076.  Please have your model# and serial # available.