My EdgeStar Combo Washer / Dryer is displaying an E10 error code. What does it mean?

Your EdgeStar Combo Washer / Dryer has sensors to monitor for various conditions that may prevent the unit from operating in a normal manner.  Please refer to your user manual for error codes and operating instructions for your specific model.

Error Code Details:

E10 – Water supply is slow or insufficient.  This error will be displayed when the unit senses that the water supply is insufficient and is taking too long to fill the tub with water.  Check to ensure that the water supply valve is fully opened and that the inlet valve filter (mesh screen found inside of the inlet hose) is not clogged.  Check to make sure the water supply line is not crimped or twisted in a way that prevents or inhibits water flow. 

Refer to the support video for additional information on how to properly connect the water supply hoses for combo washer CWD1510W.

If problems persist, please consult with an authorized technician or contact EdgeStar service at 800-297-6076.  Please have your model# and serial # available.

Stay up to date on this article:
Follow
Was this article helpful?
0 out of 0 found this helpful

Comments