How do I adjust the leveling feet on my BWC Series Beverage Cooler? – EdgeStar

It is important that you properly level your beverage cooler in order for the unit to function properly. Improper leveling can result in problems with door alignment and door sealing. A carpenters level can be used to determine the correct front to back and side to side leveling adjustments.

Leveling Leg Information and Instructions:

Model: BWC70SS BWC90SS BWC120SS BWC120SSLT

There is a single, primary adjustable leveling leg located on the bottom left of the unit. This leveling foot can be adjusted by screwing the foot in or out depending on what is required to properly level your wine cooler.

There is a small leveling foot located on the lower hinge of the unit. This small leveling leg on the lower door hinge is slightly adjustable as needed however cannot be raised or lowered more than a 1/4 ". Typically, this will not need to be adjusted as the larger leveling leg will provide adequate movement to properly level the unit.
The rear support is not adjustable and serves to both provide a solid footing for the unit as well as to provide additional support for the compressor located in the lower section on the backside of the unit.

Model: BWC120SSLD, BR1000SS / KC1000SS

There is a single, primary adjustable leveling leg located on the bottom right of the unit. This leveling foot can be adjusted by screwing the foot in or out depending on what is required to properly level your wine cooler.
There is a small, non adjustable, leveling foot located on the lower hinge of the unit.
The rear support is not adjustable and serves to both provide a solid footing for the unit as well as to provide additional support for the compressor located in the lower section on the backside of the unit.